Salient Features:
     
   

The machines are built with fully enclosed CAST IRON body. These are SEASONED & precisely calibrated for accuracy. The special CLAMPING CONE holds the job firmly and avoids slippages. This also protects the INDENTORS. Transparent glass cover covers the dial gauge. It protects form dust damages. The loading is by square threaded screw & unloading is by eccentric lever while penetration is Hydraulic.

     
     ROCKWELL SUPERFICIAL BRINELL HARDNESS TESTER
     
     
    1 . AZ+SF (15-250)
    A Unique combination of AZ-250 & SF-15-45 models. Manual load selection
 
    * Automatic zero setting type superficial dial gauge
* 15, 30, 45, 60, 100, 150, 187.5 & 250 kgf. Load range
* To check Rockwell scale, BRINELL Scale & Superficial N & T Scales

     STANDARD EQUIPMENT LIST :  
   
1.
One dial guage dia. 80 mm.
2.
One flat table Dia. 50 mm.
3.
One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm.
4.
One Diamond indenter with 120° cone angle.
5.
One test block master for Rockwell “C” Scale.
6.
One ball indenter 1/16” dia.
7.
One test block master for Rockwell “B” Scale.
8.
A set of allenkey 3/32" & 5/32"
9.
A set of telescopic sleeve for screw protection.
10.
One set of weight, 60, 100 & 150 kgf. Cast Iron.
11.
Accessories kit Box.
12.
One set of weight 15, 30 & 45 kgf. aluminium.
13.
One test block master HB & 187.5 kgf. load.
14.
One ball indentor 2.5 mm dia.
15.
One test block master HB & 250 kgf. load.
16.
One ball indenter 5.0mm Dia.
17.
One test block master HRN 30.
18.
One test block master HRT 30.
19.
A brinell microscope.
20.
One instruction Manual.
21.
Levelling bots (Four)
22.
One Machine Cover.