Salient Features :
     
   

The machines are built with fully enclosed CAST IRON body. These are SEASONED & precisely calibrated for accuracy. The special CLAMPING CONE holds the job firmly and avoids slippages. This also protects the INDENTERS. Transparent glass cover covers the dial gauge. It protects form dust damages. The loading is by square threaded screw & unloading is by eccentric lever while penetration is Hydraulic.

     
     ROCKWELL BRINELL HARDNESS TESTER :
     
     1. ALZ – B - 187.5
     
    * Automatic load selector provided at right side of the machine
* Automatic zero setting type dial gauge
* 60, 100, 150 & 187.5 kgf major load
* TO check Rockwell scale and BRINELL scale with ball Dia. 2.5 mm & 187.5 kgf load
     
       
     STANDARD ACCESSORIES :  
   
1.
One dial gauge Dia. 80 mm.
2.
One flat table Dia. 50 mm.
3.
One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm.
4.
One Diamond indenter with 120° cone angle.
5.
One test block master for Rockwells “C” scale
6.
One ball indenter 1/16” dia.
7.
One test block for Rockwell “B” scale
8.
An Allen key 3/32” and 5/32”.
9.
A set of telescopic sleeve for screw protection.
10.
One set of weight, 60, 100 & 150 kgf. Cast Iron.
11.
Accessories kit Box for above accessories.
13.
One test block master HB & 187.5 kgf. load.
14.
One ball indenter 2.5mm. Dia.
19.
One BRINELL Microscope.
20.
One instruction Manual.
21.
Levelling bots (Four)
22.
One Machine Cover.
 
     2. ALZ- B - (62.5,100,125,150)  
       
    * Manual load selection
* Automatic zero setting type dial gauge
* 62.5, 100,125 &150 kgf major load
* TO check Rockwell scale and BRINELL scale with ball Dia. 2.5mm & 62.5kgf. & 125 kgf load
       
       
     STANDARD ACCESSORIES :  
   
1.
One dial gauge Dia. 80 mm.
2.
One flat table Dia. 50 mm.
3.
One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm.
4.
One Diamond indenter with 120° cone angle.
5.
One test block master for Rockwells “C” scale
6.
One ball indenter 1/16” dia.
7.
One test block for Rockwell “B” scale
8.
An Allen key 3/32” and 5/32”.
9.
A set of telescopic sleeve for screw protection.
11.
Accessories kit Box for above accessories.
13.
One test block master HB & 62.5 kgf. load.
14.
One ball indenter 2.5mm. Dia.
19.
One BRINELL Microscope.
20.
One instruction Manual
21.
Levelling bots (Four)
22.
One Machine Cover.

 
     Salient Features :  
       
   

The machines are built with fully enclosed CAST IRON body. These are SEASONED & precisely calibrated for accuracy. The special CLAMPING CONE holds the job firmly and avoids slippages. This also protects the INDENTERS. Transparent glass cover covers the dial gauge. It protects form dust damages. The loading is by square threaded screw & unloading is by eccentric lever while penetration is Hydraulic.

 
       
     3. ALZ – B – 250  
       
    * Automatic load selector provided at right side of the machine
* Automatic zero setting type dial gauge
* 60, 100,150,187.5 & 250 kgf major load
* TO check Rockwell scale and BRINELL scale
 
       
     STANDARD ACCESSORIES:  
   
1.
One dial gauge Dia. 80 mm.
2.
One flat table Dia. 50 mm.
3.
One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm.
4.
One Diamond indenter with 120° cone angle.
5.
One test block master for Rockwell “C” scale.
6.
One ball indenter 1/16” dia.
7.
One test block for Rockwell “B” scale.
8.
An Allen key 3/32” and 5/32”.
9.
A set of telescopic sleeve for screw protection.
10.
One set of weight, 60, 100 & 150 kgf. Cast Iron.
11.
Accessories kit Box for above accessories.
13.
One test block HB for ball dia. 2.5mm & 187.5 kgf. Weight.
14.
One ball indenter 2.5mm. Dia.
15.
One test block HB for ball dia. 5mm & 250 kgf. Weight.
16.
One ball indenter 5.0mm. Dia.
19.
One BRINELL Microscope.
20.
One instruction Manual.
21.
Levelling bots (Four)
22.
One Machine Cover.
 
       
   

4. ALZ-B-(62.5-125-187.5-250)

 
   


* AUTO LOAD SELECTION
* AUTO ZERO SETTING TYPE DIAL GAUGE
* 62.5,125,187.5,250 KGF LOAD RANGE
* TO CHECK BRINELL SCALE

 
       
   

STANDARD ACCESSORIES :

 
       
   
1.
One dial gauge Dia. 80 mm.
2.
One flat table Dia. 50 mm.
3.
One Vee grooved table for cylindrical job Dia. 6 mm to 45 mm.
8.
An Allen key 3/32” and 5/32”.
9.
A set of telescopic sleeve for screw protection.
11.
Accessories kit Box for above accessories.
13.
One test block HB for ball dia. 2.5mm & 62.5 kgf. Weight.
14.
One ball indenter 2.5mm. Dia.
15.
One test block HB for ball dia. 5mm & 250 kgf. Weight.
16.
One ball indenter 5.0mm. Dia.
19.
One BRINELL Microscope.
20.
One instruction Manual.
21.
Levelling bots (Four)
22.
One Machine Cover.
 
       
       
   
  • Any other testers can be manufactured as per the customers design

  • We reserve the right to change in above specification due to constant improvement & development